Cost-benefit analysis of tomato in soilless culture systems with saline water under greenhouse conditions.
Clicks: 233
ID: 19175
2019
The current need to produce food for a growing population, from diminishing natural resources, such as water and energy, and with minimum environmental degradation, demands the optimization of production. We compare the economic feasibility of tomato production in an open system with a perlite substrate, a closed system with the nutrient film technique (NFT), and a hydroponic crop (deep flow technique, DFT) using three levels of salinity that are found within the normal range for irrigation water quality in southeastern Spain.Production with DFT resulted in an increase in the cost of phytosanitary treatments and the cost of maintenance. Production with perlite resulted in an increase in the cost of irrigation water and fertilization, and the use of NFT resulted in an increase in energy costs. The point of price equilibrium was exceeded in the three soilless systems when using low salinity water, and in perlite, with intermediate salinity water.Profitability was reduced in the following order: perlite > NFT > DFT. There were positive results when using irrigation water with low salinity, and in the case of perlite, with intermediate salinity. In every case, salinity reduced the profitability of the operation, and this was greater when NFT was employed. The analysis of these soilless systems should be continued to determine the possibility of reducing cultivation costs. © 2019 Society of Chemical Industry.
Reference Key |
cmarazapata2019costbenefitjournal
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | Cámara-Zapata, José M;Brotons-Martínez, José M;Simón-Grao, Silvia;Martinez-Nicolás, Juan J;García-Sánchez, Francisco; |
Journal | Journal of the science of food and agriculture |
Year | 2019 |
DOI | 10.1002/jsfa.9857 |
URL | |
Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.