Clay stabilization in sandstone reservoirs and the perspectives for shale reservoirs.
Clicks: 194
ID: 79596
2019
This study presents a comprehensive review of clay stabilizers and updated understandings of their mechanisms on stabilizing clay minerals in improved and enhanced oil recovery (IOR and EOR) applications. First, formation damage mechanisms related to clays in conventional sandstone and shale reservoirs are briefly introduced. Then existing clay stabilizers, including simple inorganic salts, inorganic polymers, acids, alkalis, simple organic salts, organic polymers, oligomers, nanoparticles, cationic surfactants, and organosilanes, as well as their characteristics, are summarized. In addition, we elucidated the common experimental techniques used for clay stabilization evaluation. Each category of clay stabilizers, experimental studies, field practices, and lessons learned in the past few decades are then critically reviewed and assessed in-depth, based on which advantages and disadvantages of all these clay stabilizers are explicated and compared as instructive guidelines for proper stabilizer selection and future applications. Finally, we discussed clay stabilization involved in shale reservoir development that recently came into view and pointed out directions deserving future studies. Identification of clay induced formation damage as well as clarification of reservoir rock and fluid properties is the prerequisite for screening and developing clay stabilizers. To select clay stabilizers and optimize project design, it is necessary to evaluate their performance by experiments on preserved reservoir cores. This will allow for treatment upscaling and effectiveness prediction.
Reference Key |
wang2019clayadvances
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | Wang, Lei; |
Journal | advances in colloid and interface science |
Year | 2019 |
DOI | S0001-8686(19)30341-0 |
URL | |
Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.