[1] analysis of the height difference of the zero isotherm according to two temperature profilers

[2] experimental investigation of a counter-rotating compressor with boundary layer suction

[3] shape optimization of nrel s809 airfoil for wind turbine blades using a multiobjective genetic algorithm

[4] ulse-magnetic stamping of thin-walled cylindrical dyes

[5] h∞ networked cascade control system design for turboshaft engines with random packet dropouts

[6] ship noise level analysis based on the international regulations

[7] parametric study of turbine ngv blade lean and vortex design

[8] satellite lithium-ion battery remaining useful life estimation with an iterative updated rvm fused with the kf algorithm

[9] online fault-tolerant onboard aeroengine model tuning structure

[10] a hybrid original approach for prediction of the aerodynamic coefficients of an atr-42 scaled wing model

[11] the program of non-rigid pavement computer-aided calculation УКРРДО 15

[12] on the design of squeeze film dampers operating within the limits of the reynolds theory

[13] real-time drogue recognition and 3d locating for uav autonomous aerial refueling based on monocular machine vision

[14] configuration model of partial repairable spares under batch ordering policy based on inventory state

[15] modal analysis of a small vertical axis wind turbine (type darrieus)

[16] modeling of hardware and algorithmic structure of mobile multipositioning radio rangefinding navigation and landing aerosystem in its spatial configuration

[17] a multi-objective multi-memetic algorithm for network-wide conflict-free 4d flight trajectories planning

[18] the effects of acmi flight crew’s long term outstation hotel stay on accumulated fatigue

[19] fast low-energy halo-to-halo transfers between sun–planet systems

[20] aircraft operation depending upon the uncertainty of maintenance alternatives

[21] high-cycle fatigue behavior of co-based superalloy 9crco at elevated temperatures

[22] determination of gasoline ethanol mixture by preset octane level of motor fuel

[23] modeling of viscous turbulent 3d flow model in torque converter

[24] the effects of cross-diffusion and radiation on mixed convection from a vertical flat plate embedded in a fluid-saturated porous medium in the presence of viscous dissipation

[25] flight loads prediction of high aspect ratio wing aircraft using multibody dynamics

[26] decentralized model predictive control for cooperative multiple vehicles subject to communication loss

[27] remaining useful life prediction based on variation coefficient consistency test of a wiener process

[28] analytical investigation of steady three-dimensional problem of condensation film on inclined rotating disk by akbari-ganji's methodanalytical investigation of steady three-dimensional problem of condensation film on inclined rotating disk by akbari-ganji's methodretain-->

[29] quality management principles as illustrated by the organization of romanian inter-war factories. a century of romanian industrial tradition in aeronautics

[30] algorithm and code for analyzing hyperspectral images using the hurst exponent

[31] analysis and calculation of dimensional circuits of automotive engineering details on basis of artificial neural networks

[32] on the effects of modeling as-manufactured geometry: toward digital twin

[33] a seventh-order model for dynamic response of an electro-hydraulic servo valve

[34] numerical illustration of the global and local stability and instability of the constant spatially developing 2d gas flow

[35] conflict alerts in a-smgcs - different point of view on evaluating the conflict alert function

[36] definition of contact stress in friction units on the basis of the acoustic emission method

[37] on-board heterogeneous information computer networks of perspective aircraft

[38] wave-wave regular interactions of a gasdynamic type

[39] author index of chinese journal of aeronautics (2015)

[40] numerical study on film cooling mechanism and characteristics of cylindrical holes with branched jet injections

[41] the inverse-scattering problem solution and shape from the reflected electromagnetic wave field structure

[42] problem analysis using navigation systems of unmanned aerial vehicles at high latitudes

[43] synergetic effect of applying informational technologies for training students

[44] infrastructure information management system of a transport enterprise

[45] designing a control system for an airplane wing flutter employing gas actuators

[46] research of downtime of freight vehicle at border crossings at transportations of cargoes between ukraine and russia

[47] control techniques of tilt rotor unmanned aerial vehicle systems: a review

[48] optimum operational parameters for yawed wind turbines

[49] uncertainty analysis and design optimization of hybrid rocket motor powered vehicle for suborbital flight

[50] motion synchronization in a dual redundant ha/eha system by using a hybrid integrated intelligent control design

[51] application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

[52] hysteresis behaviors of compressor rotating stall with cusp catastrophic model

[53] advanced composite materials of the future in aerospace industry

[54] experimental determination of relative distributing of vortical currents in metallic sheet

[55] drilling load model of an inchworm boring robot for lunar subsurface exploration

[56] realization of process of decision making at choice of organizationally-technological structures of fms

[57] method of hydrogen feeding for automotive engine supply

[58] design and experiments of an active isolator for satellite micro-vibration

[59] fault self-repair strategy based on evolvable hardware and reparation balance technology

[60] nozzle geometry variations on the discharge coefficient

[61] book review: theory of elastic systems for railway vehicles, ioan sebeŞan, ion copaci, published by matrix rom, 2008 (in romanian) isbn: 978-973-755-372-0

[62] systematic centroid error compensation for the simple gaussian psf in an electronic star map simulator

[63] control of uncertain systems by feedback linearization with neural networks augmentation. part ii. controller validation by numerical simulation

[64] power management strategy by enhancing the mission profile configuration of solar-powered aircraft

[65] modelling and simulation of flight control electromechanical actuators with special focus on model architecting, multidisciplinary effects and power flows

[66] penetration of a shock wave in a fully supersonic flame front with the formation of an expansion fan

[67] determination of traffic congestion in central part of kharkiv on basis of parking density law

[68] simplified mathematical model of small sized unmanned aircraft vehicle layout

[69] kane method based dynamics modeling and control study for space manipulator capturing a space target

[70] numerical simulations of single and multi-staged injection of h2 in a supersonic scramjet combustor

[71] aload - a code to determine the concentrated forces equivalent with a distributed pressure field for a fem analysis

[72] global modeling of n2o discharges: helicon plasma thruster application

[73] brainstorming the cryoplane layout by using the iterative ahp-qfd-ahp approach

[74] extension of analytical indicial aerodynamics to generic trapezoidal wings in subsonic flow

[75] processes on uncontrolled aerodromes and safety indicators - part ii

[76] editorial

[77] mykola hovorushchenko (1924–2011): biography of a scientist

[78] heat and mass transfer effects on mhd viscoelastic fluid over a stretching sheet through porous medium in presence of chemical reaction

[79] very high cycle fatigue behavior of ta11 titanium alloy

[80] design of a compact six-component force and moment sensor for aerodynamic testing

[81] an ipc-based prolog design pattern for integrating backward chaining inference into applications or embedded systems

[82] a guidance law for uav autonomous aerial refueling based on the iterative computation method

[83] determination of rational quantity of terminal resources on the basis of network planning theory

[84] unsteady numerical estimation of the aerodynamic loads of the krueger flap

[85] stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

[86] numerical study of aerodynamic characteristics of fsw aircraft with different wing positions under supersonic condition

[87] an experimental investigation on the trailing edge cooling of turbine blades

[88] observer-based adaptive sliding mode backstepping output-feedback dsc for spin-stabilized canard-controlled projectiles

[89] complex variable method for an anti-plane elliptical cavity of one-dimensional hexagonal piezoelectric quasicrystals

[90] architecture for measuring blade tip clearance and time of arrival with multiple sensors in airplane engines

[91] software defect prevention based on human error theories

[92] a survey of snakebite knowledge among field forces in china

[93] spectral-spatial target detection based on data field modeling for hyperspectral data

[94] influence of maleic anhydride/glycidyl methacrylate cografted polylactic acid on properties of wood flour/pla composites

[95] steady glide dynamic modeling and trajectory optimization for high lift-to-drag ratio reentry vehicle

[96] design and performance analysis of position-based impedance control for an electrohydrostatic actuation system

[97] relationship of the three theories of the pneumatic tyre rolling

[98] novel fractional order calculus extended pn for maneuvering targets

[99] robust attitude coordinated control for spacecraft formation with communication delays

[100] analysis of acceleration of class e-8 race car equipped with various transmission options

[101] flight software development and validation workflow management system