[1] Numerical simulation of wire-coating low-density polyethylene: Theory and experiments

[2] Monte Carlo simulation of the crystal-melt interface of a Lennard-Jones substance

[3] Tubing Extrusion of a Fluoropolymer Melt

[4] Calendering analysis without the lubrication approximation

[5] Room-temperature hydrogen sulfide removal with zinc oxide nanoparticle/molecular sieve prepared by melt infiltration

[6] Synthesis of Metal-Containing Poly(thiophene methines) via Solid-and Melt-State Polymerization and Their Related Applications as Highly Sensitive Ni ²⁺ Chemosensors

[7] Effect of Self-Assembly of Oxalamide Based Organic Compounds on Melt Behavior, Nucleation, and Crystallization of Isotactic Polypropylene

[8] Crystallization-in-emulsion process of a melted organic compound: In situ optical monitoring and simultaneous droplet and particle size measurements

[9] Rapid simultaneous detection of blaoxa-23, Ade-B, int-1, and ISCR-1 in multidrug-resistant Acinetobacter baumannii using single-tube multiplex PCR and high resolution melting assay

[10] Molecular detection of rifampin, isoniazid, and ofloxacin resistance in Iranian isolates of Mycobacterium tuberculosis by high-resolution melting analysis

[11] Rapid simultaneous detection of blaoxa-23, Ade-B, int-1, and ISCR-1 in multidrug-resistant Acinetobacter baumannii using single-tube multiplex PCR and high resolution melting assay

[12] Rapid simultaneous detection of blaoxa-23, Ade-B, int-1, and ISCR-1 in multidrug-resistant Acinetobacter baumannii using single-tube multiplex PCR and high resolution melting assay

[13] Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

[14] Molecular detection of rifampin, isoniazid, and ofloxacin resistance in Iranian isolates of Mycobacterium tuberculosis by high-resolution melting analysis

[15] High-resolution melting analysis of the three common nondeletional α-thalassemia mutations in the Chinese population: Hbs Constant Spring, Quong Sze and Westmead.

[16] 'A melting pot of cultures' -challenges in social adaptation and interactions amongst international medical students.

[17] Optimization of High Resolution Melting (HRM) Method for Genotyping and Estimating Frequency of SNP rs4284505 in the Vietnamese Breast Cancer

[18] Development of a new High Resolution Melting (HRM) assay for identification and differentiation of Mycobacterium tuberculosis complex samples

[19] Efficient coralline algal psbA mini barcoding and High Resolution Melt (HRM) analysis using a simple custom DNA preparation

[20] Identification of reliable biomarkers of human papillomavirus 16 methylation in cervical lesions based on integration status using high-resolution melting analysis

[21] Evaluation of the Capacity of PCR and High-Resolution Melt Curve Analysis for Identification of Mixed Infection with Mycoplasma gallisepticum Strains.

[22] Accurate diagnosis of spinal muscular atrophy and 22q11.2 deletion syndrome using limited deoxynucleotide triphosphates and high-resolution melting

[23] Diffusive Steel Scrap Melting in Carbon-Saturated Hot Metal-Phenomenological Investigation at the Solid⁻Liquid Interface.

[24] Impact of melting heat transfer and nonlinear radiative heat flux mechanisms for the generalized Burgers fluids

[25] Tuning the processability, morphology and biodegradability of clay incorporated PLA/LLDPE blends via selective localization of nanoclay induced by melt mixing sequence

[26] Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure.

[27] Charge Density Wave Melting in One-Dimensional Wires with Femtosecond Subgap Excitation.

[28] Influence of Carbon Nanoparticle Addition (and Impurities) on Selective Laser Melting of Pure Copper.

[29] Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance.

[30] Photothermal Welding, Melting, and Patterned Expansion of Nonwoven Mats of Polymer Nanofibers for Biomedical and Printing Applications.

[31] Biologic stromal ring to manage stromal melting after intrastromal corneal ring segment implantation.

[32] Primary orbital reconstruction with selective laser melted core patient-specific implants: overview of 100 patients.

[33] Printability and Microstructure of Selective Laser Melting of WC/Co/Cr Powder.

[34] Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)

[35] Thermal Analysis of Some Prosthetic Dental Biomaterials Processed by Selective Laser Melting

[36] Fracture of three-dimensional lattices manufactured by selective laser melting

[37] Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy

[38] Melt pool boundary extraction and its width prediction from infrared images in selective laser melting

[39] Laser beam melting of Cr<inf>3</inf>C<inf>2</inf>-NiCr

[40] Surface morphology evolution during pulsed selective laser melting: Numerical and experimental investigations

[41] Corrigendum to “Microstructure and tensile properties of iron parts fabricated by selective laser melting”. (Optics and Laser Technology (2014) 56 (451–460), (S0030399213003423), (10.1016/j.optlastec.2013.09.017))

[42] Effects of radiative local heating on metal solidification during selective laser melting for additive manufacturing

[43] Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting

[44] Layerwise fabrication of refractory NiCrSiB composite with gradient grow of tungsten carbide additives by selective laser melting

[45] Investigation into using resonant frequency measurements to predict the mechanical properties of Ti-6Al-4V manufactured by selective laser melting

[46] Microstructure and mechanical properties of as-deposited and heat treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) alloy fabricated by laser melting deposition

[47] Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting

[48] The interfacial structure of Al/Al<inf>4</inf>C<inf>3</inf> in graphene/Al composites prepared by selective laser melting: First-principles and experimental

[49] Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting

[50] Mitigation of anisotropic fatigue in nickel alloy 718 manufactured via selective laser melting

[51] In-situ X-ray tomography analysis of the evolution of pores during deformation of AlSi10Mg fabricated by selective laser melting

[52] Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting

[53] Evaluation via powder metallurgy of nano-reinforced iron powders developed for selective laser melting applications

[54] Microstructure and grain growth direction of SRR99 single-crystal superalloy by selective laser melting

[55] Selective laser melting helps fabricate record-large bulk metallic glass: Experiments, simulation and demonstrative part

[56] Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting

[57] Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties

[58] Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting

[59] Determining the Composite Structure of Au-Fe-Based Submicrometre Spherical Particles Fabricated by Pulsed-Laser Melting in Liquid

[60] Investigation of tribo-mechanical properties and structure of specimens obtained by selective laser melting of stainless steel powders

[61] Modeling of the thermal physical process and study on the reliability of linear energy density for selective laser melting

[62] Experimental investigation on the thermal management performance of heat sink using low melting point alloy as phase change material

[63] Effects of melting process on the hydromagnetic wedge flow of a Casson nanofluid in a porous medium

[64] Identification of threats to the position of a transport worker in Legnica Copper Smelter and Refinery

[65] Assessment of volumetric scale-up law for processing of a sustained release formulation on co-rotating hot-melt extruders.

[66] The Rheology of PEOT/PBT Block Copolymers in the Melt State and in the Thermally-Induced Sol/Gel Transition. Implications on the 3D-Printing Bio-Scaffold Process

[67] Melting transitions in biomembranes.

[68] Probabilistic Human Health Risk Assessment of Heavy Metal Intake via Vegetable Consumption around Pb/Zn Smelters in Southwest China.

[69] High-Pressure Melt Curve and Phase Diagram of Lithium.

[70] Design and fabrication of low-cost electrical resistance based metal melting furnace for casting applications

[71] Coinheritance of Hb A-Melbourne (: c.130G>A) and Hb E (: c.79G>A) in Laos and Simultaneous High Resolution Melt Detection of Hb A-Melbourne and Hb A-Lampang (: c.142G>A) in a Single Tube.

[72] Effect of soil pH and organic matter content on heavy metals availability in maize (Zea mays L.) rhizospheric soil of non-ferrous metals smelting area.

[73] Comparison of biparental and melting pot methods of crossing sugarcane in Hawaii

[74] Corrigendum to “Microstructure and mechanical properties of tempered glass joint bonded with Bi-B-Zn low melting glass” (Journal of Materials Processing Tech. (2019) 271 (404–412), (S0924013619300639), (10.1016/j.jmatprotec.2019.02.017))

[75] Methylammonium Polyiodides: Remarkable Phase Diversity of the Simplest and Low-Melting Alkylammonium Polyiodide System.

[76] Nano-engineering of high-performance PA6.6 nanocomposites by the integration of CVD-grown carbon fiber on graphene as a bicomponent reinforcement by melt-compounding

[77] 3D Printing of Metallic Microstructured Mould Using Selective Laser Melting for Injection Moulding of Plastic Microfluidic Devices.

[78] Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead

[79] Mid-infrared spectroscopy of laser-produced basalt melts for remote sensing application

[80] Inclusions in melting process of titanium and titanium alloys

[81] A Statistical Method to Enhance the Analysis of the Differences Among High-Resolution Melting (HRM) Curves of PCR-Amplified DNA Fragments.

[82] Nanoarray Digital Polymerase Chain Reaction with High-Resolution Melt for Enabling Broad Bacteria Identification and Pheno-Molecular Antimicrobial Susceptibility Test.

[83] Identifying Mutations by High Resolution Melting in a TILLING Population of Rice.

[84] An accurate and rapid method for species identification in plants: Melting fingerprint-high resolution melting (MFin-HRM) analysis

[85] Transcriptome sequencing, de novo assembly, characterisation of wild accession of blackgram (Vigna mungo var. silvestris) as a rich resource for development of molecular markers and validation of SNPs by high resolution melting (HRM) analysis

[86] High-resolution melt curve analysis: A real-time based multipurpose approach for diagnosis and epidemiological investigations of parasitic infections.

[87] Thallium isotopic fractionation in industrial process of pyrite smelting and environmental implications.

[88] Model of the process with piecewise-constant extremals to minimize losses of vitamins during the melting of melons and gourds

[89] Melt-processing of cellulose nanofibril/polylactide bionanocomposites via a sustainable polyethylene glycol-based carrier system.

[90] High-resolution melt analysis enables simple genotyping of complicated polymorphisms of codon 18 rendering the NUDT15 diplotype.

[91] Gas chromatography-mass spectrometric characterization of Se<inf>n</inf>S<inf>m</inf> compounds in synthetic melts and sediments

[92] The potential application of a Cobalt Chrome Molybdenum femoral stem with functionally graded orthotropic structures manufactured using Laser Melting technologies.

[93] Designed Materials by Additive Manufacturing—Impact of Exposure Strategies and Parameters on Material Characteristics of AlSi10Mg Processed by Laser Beam Melting

[94] Corrigendum to ‘Neutron computed tomography of phase separation structures in solidified Cu-Co alloys and investigation of relationship between the structures and melt convection during solidification’ (Scripta Materialia (2020) 175 (29–32), (S1359646219305263), (10.1016/j.scriptamat.2019.08.041))

[95] Terrestrial Remote Sensing of Snowmelt in a Diverse High-Arctic Tundra Environment Using Time-Lapse Imagery

[96] Antimicrobial Polyethylene through Melt Compounding with Quaternary Ammonium Salts

[97] The application of xpert mycobacterium tuberculosis/rifampicin, quantitative polymerase chain reaction and high resolution melting curve in the diagnosis of superficial lymph node tb.

[98] An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part II.

[99] Experimental and Simulation Study on the Dissolved Amount and Dissolution Rate of Supercritical CO in Polystyrene Melt.

[100] Study on melt stratification and migration in debris bed using the moving particle semi-implicit method

[101] Electromagnetic separation of coarse Al–Si melts: The migration behavior of iron-rich phase and continuous growth of primary silicon