Journament

Keyword Connections - Mechanical Keywords

Connection Type	Connection
Journals	No Journal Connected
Research Groups	No Research Group Connected
Bibliographies	[1] In situ observation of nanograin rotation and deformation in nacre [2] A controlled trial of aerosolized ribavirin in infants receiving mechanical ventilation for severe respiratory syncytial virus infection [3] Variables related to materials and preparing for bond strength testing irrespective of the test protocol [4] Effects of surface roughness and maximum load on the mechanical properties of cancellous bone measured by nanoindentation [5] Particulate cartilage under bioreactor-induced compression and shear [6] Arthroscopic assessment for intra-articular disorders in residual ankle disability after sprain [7] Comprehensive toxicological study over 160 processing factors of pesticides in selected fruit and vegetables after water, mechanical and thermal processing treatments and their application to human health risk assessment. [8] Silver-loaded nanoparticles affect ex-vivo mechanical behavior and mineralization of dentin. [9] Graphene Oxide/Silver Nanoparticle Coating Produced by Electrophoretic Deposition Improved the Mechanical and Tribological Properties of NiTi Alloy for Biomedical Applications [10] The effects of nano-sized carbon fillers on the physico-chemical, mechanical, and biological properties of polyester nanocomposites [11] Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil [12] Bioactive starch nanocomposite films with antioxidant activity and enhanced mechanical properties obtained by extrusion followed by thermo-compression [13] Ultraviolet to Mid-Infrared Emissivity Control by Mechanically Reconfigurable Graphene. [14] Ultraviolet to Mid-Infrared Emissivity Control by Mechanically Reconfigurable Graphene. [15] Functional endoluminal paving (FELP): Thermoforming, biodegradation, and mechanical properties of a novel polymer graft for abdominal aortic aneurysms [16] The effects of chemical reaction on the microstructure and mechanical properties of polyacrylonitrile (PAN) precursor fibers [17] Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler [18] Improvement of the mechanical and thermal properties of polyester nonwoven fabrics by PTFE coating [19] Comparative study on physicochemical and mechanical characterization of new nanocarbon-based hydroxyapatite nanocomposites [20] INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES [21] Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties [22] Mg/Zn COMPOSITES PRODUCED BY MECHANICAL ALLOYING AND HOT PRESSING AND IN-VITRO BIODEGRADATION [23] Effect of fullerene (C60) nanoparticle on mechanical properties of hot-extruded aluminum matrix composite [24] INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES [25] Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties [26] INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES [27] Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties [28] An Analysis of the Mechanical Properties of the Ponseti Method in Clubfoot Treatment [29] Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler [30] Improvement of the mechanical and thermal properties of polyester nonwoven fabrics by PTFE coating [31] Comparative study on physicochemical and mechanical characterization of new nanocarbon-based hydroxyapatite nanocomposites [32] Mg/Zn COMPOSITES PRODUCED BY MECHANICAL ALLOYING AND HOT PRESSING AND IN-VITRO BIODEGRADATION [33] Effect of fullerene (C60) nanoparticle on mechanical properties of hot-extruded aluminum matrix composite [34] High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers. [35] Effect of nanoparticle size on the mechanical properties of nanoparticle assemblies. [36] Development of q-L-EIV interactive curves for comparison of the environmental performance of composite slabs and RC slabs from the perspective of mechanical features. [37] Cardiac mechanical energy and effects on the arterial tree. [38] Sustainable Materials with Enhanced Mechanical Properties Based on Industrial Polyhydroxyalkanoates Reinforced with Organomodified Sepiolite and Montmorillonite [39] Revelation of enzyme activity of mutant pyrazinamidases from Mycobacterium tuberculosis upon binding with various metals using quantum mechanical approach. [40] Influence of Strengthening Material Behavior and Geometry Parameters on Mechanical Behavior of Biaxial Cruciform Specimen for Envelope Material. [41] Evaluation of Static and Dynamic Residual Mechanical Properties of Heat-Damaged Concrete for Nuclear Reactor Auxiliary Buildings in Korea Using Elastic Wave Velocity Measurements. [42] Prediction Model for Mechanical Properties of Lightweight Aggregate Concrete Using Artificial Neural Network. [43] Transport mechanism of deformable micro-gel particle through micropores with mechanical properties characterized by AFM [44] Effect of two organic chemical fluids on the mechanical properties of an expansive clay soil [45] Chemical state, structure and mechanical properties of multi-element (CrTaNbMoV)Nx films by reactive magnetron sputtering [46] The Construction of Undergraduate Pathway Curriculum System in Higher Vocational Education in Mechanical Engineering [47] Game-based learning in mechanical engineering education: Case study of games-based learning application in computer aided design assembly [48] CB2 receptor deletion on myeloid cells enhanced mechanical allodynia in a mouse model of neuropathic pain [49] Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails [50] Effect of cooling rate on microstructure and mechanical properties in the CGHAZ of electroslag welded pearlitic rail steel [51] Effect of Ce on mechanical properties and corrosion resistance of CL50D high speed rail wheel steel [52] Effects of Quenching Temperature and Cooling Rate on the Microstructure and Mechanical Properties of U75V Rail Steel [53] Microstructural and Mechanical Properties Examination of High-Power Diode Laser-Treated R260 Grade Rail Steels Under Different Processing Temperatures [54] Cartography of the mechanical properties of the human amniotic membrane. [55] Plant-derived Nanocellulose as Structural and Mechanical Reinforcement of Freeze-Cast Chitosan Scaffolds for Biomedical Applications. [56] Erratum: Computer simulations suggest that prostate enlargement due to benign prostatic hyperplasia mechanically impedes prostate cancer growth (Proceedings of the National Academy of Sciences of the United States of America (2019) 116 (1152–1161) DOI: 10.1073/pnas.1815735116) [57] Effects of Tear Film Instability on Sensory Responses to Corneal Cold, Mechanical, and Chemical Stimuli. [58] Separation mechanism of polyvinyl chloride and copper components from swollen electric cables by mechanical agitation. [59] The effects of domestic mechanical knee joints on pelvic motion in transfemoral amputees. [60] Biological Reclaiming of Recycled Rubber and Its Effect on Mechanical Properties of New Rubber Vulcanizates [61] Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations [62] Influence of seawater aging on mechanical properties of nano-Al<inf>2</inf>O<inf>3</inf> embedded glass fiber reinforced polymer nanocomposites [63] Enhanced thermal and mechanical properties of epoxy composites by mixing thermotropic liquid crystalline epoxy grafted graphene oxide [64] Incorporation of Carbon Nanofillers Tunes Mechanical and Electrical Percolation in PHBV:PLA Blends [65] A mechanical acupuncture instrument mitigates the endoplasmic reticulum stress and oxidative stress of ovariectomized rats. [66] Tunable Mechanical, Electrical, and Thermal Properties of Polymer Nanocomposites through GMA Bridging at Interface. [67] Normative technical documentation of association of mechanical engineers, Czech national code of equipment and piping of nuclear power plants of WWER type [68] Clamping force effects on the performance of mechanically attached piezoelectric transducers for impedance-based NDE [69] Research on the Application of Automation Software Control System in Tea Garden Mechanical Picking [70] Impact of mechanical thrombectomy device on thrombus histology in acute embolic stroke. [71] Physical and mechanical characterization of gypsum boards containing phase change materials for latent heat storage [72] Effect of CNTs in Copper Matrix on Mechanical Characteristics and Tribological Behavior under Dry Sliding and Boundary Lubrication Conditions. [73] Looking for diagnostics parameters of bearings of the gas turbine engine LM 2500 on the basis of mechanical contaminations in the lubricating oil [74] Reversible Hydrogel Photopatterning: Spatial and Temporal Control over Gel Mechanical Properties Using Visible Light Photoredox Catalysis [75] Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN [76] Effect of Extrusion Temperature on the Microstructure and Mechanical Properties of SiCnw/2024Al Composite. [77] Design of Dual Hybrid Network Natural Rubber-SiO Elastomers with Tailored Mechanical and Self-Healing Properties. [78] Healable and Mechanically Super-Strong Polymeric Composites Derived from Hydrogen-Bonded Polymeric Complexes. [79] Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites [80] Experimental study on mechanical behavior, biodegradability, and resistance to natural weathering and ultraviolet radiation of wood-plastic composites [81] Green Synthesis of Aluminium Oxide Nanoparticles and its Applications in Mechanical and Thermal Stability of Hybrid Natural Composites [82] Improving Mechanical Properties and Reaction to Fire of EVA/LLDPE Blends for Cable Applications with Melamine Triazine and Bentonite Clay [83] A note on the roles of quantum and mechanical models in social biophysics. [84] Structural and mechanical characterization of custom design cranial implant created using additive manufacturing [85] ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR [86] Microstructure and mechanical properties of additive manufactured porous Ti-33Nb-4Sn scaffolds for orthopaedic applications. [87] Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance. [88] Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting [89] Investigation into using resonant frequency measurements to predict the mechanical properties of Ti-6Al-4V manufactured by selective laser melting [90] Microstructure and mechanical properties of as-deposited and heat treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) alloy fabricated by laser melting deposition [91] Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting [92] Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties [93] Statistical study on the mechanical characteristics when drilling sintethyc granite [94] Diamond-like carbon films over reconstructive TMJ prosthetic materials: Effects in the cytotoxicity, chemical and mechanical properties [95] Review on the Management at Mechanical Engineering Discipline of the National Natural Science Foundation of China in 2018 [96] Study on physical and mechanical properties of the biopolymer/silver based active nanocomposite films with antimicrobial activity. [97] Investigation of thermal, mechanical, morphological and optical properties of polyvinyl alcohol films reinforced with buddha coconut (Sterculia alata) leaf fiber [98] Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package. [99] Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM [100] Molecular dynamics based cohesive zone modeling of Al (metal)–Cu50Zr50 (metallic glass) interfacial mechanical behavior and investigation of dissipative mechanisms [101] Efficacy and efficiency of poultry carcass composting using different mechanical mixing equipment for avian influenza outbreaks